Resources

Compressed air articles written for plant problems.

Use these field notes and guides to understand compressor rebuilds, controls modernization, preventative maintenance, energy audits, leak studies, and dryer ROI.

Guides

Service Guides Compressor Rebuild Planning Guide

How to prepare scope, parts, diagnostics, controls checks, and startup review before an industrial compressor rebuild.

Dryer Guides Desiccant Dryer ROI and Plant-Air Waste

A guide to understanding how dryer purge air, controls, dew point, and TFG Dryers Bone Dry design affect compressed air operating cost.

Field Notes

Diagnostics Compressor Life Is Measured, Not Assumed: Engineering-Based Condition Assessment

Age and operating hours do not tell you how much life a centrifugal compressor has left. Vibration analysis, thermal imaging, oil analysis and performance testing do.

Compressor Rebuilds Resurrection: An "Obsolete" Compressor Back in Service for Less Than a New One

Both stages damaged, the controller stripped for parts, and years out of service. The Fischer Group rebuilt it with new rotors and a TFG Allen Bradley PLC control system, below the OEM cost of replacement.

Compressor Rebuilds TA-9000 Emergency Repair: Back in the Game in Five Weeks

A second-stage failure took a hard-working TA-9000 out of service while rental compressors burned expensive diesel. Here is how The Fischer Group got it back online in five weeks.

Case Study From Aging Reciprocating Compressors to a Full Centrifugal Plant: An Iowa Case Study

One customer replaced four aging reciprocating compressors and heatless dryers with As New Refurbished Centrifugal Compressors, TFG Bone Dry desiccant dryers, Allen Bradley PLC controls, and a full SCADA system, all from The Fischer Group.

Diagnostics How Vibration Analysis Saved One Plant Tens of Thousands of Dollars

TFG's vibration analysis team caught bearing wear on a Joy centrifugal compressor before any shaft damage occurred. Here is what the data looked like and why it mattered.

Compressor Rebuilds No Compressor Is Obsolete: Rebuilding a Generation One Centac After a Decade Idle

A generation one Ingersoll Rand Centac sat idle for over ten years. Here is how The Fischer Group brought it back to better-than-new condition, and why the OEM would have written it off.

Field Notes Everyone Goes Home: Safety on Every Job

From strapping rebuilt compressors for the highway to a filter change that needed a crane, safety gets the same seriousness as every other part of the work at The Fischer Group.

Compressor Rebuilds Sometimes It's the Little Things That Matter Most

A neglected OEM inlet guide vane with worn bushings, broken linkages and excessive play, restored by our service team to better-than-ever condition.

Field Notes Settled In: Our New Service Center in Mebane, North Carolina

The Fischer Group has expanded its operational footprint with a new, fully functional service center in Mebane, North Carolina, built to support customers across the region for years to come.

Compressor Rebuilds Life Cycle Management: A Planned Mid-Life Rebuild, On Budget

A textbook lifecycle evolution: a centrifugal compressor run to its expected interval, then rebuilt to like-new condition as a planned, fully coordinated project within the customer's budget.

Compressor Rebuilds Spare Gear-Case Assemblies: Rebuilds Without the Rental Compressor

For plants running matched compressors, a spare gear-case assembly from The Fischer Group keeps air on during planned or emergency rebuilds and can eliminate costly rentals.

Compressor Rebuilds Another "Obsolete" Compressor, Another Success Story

A Joy compressor built more than 30 years ago, labeled obsolete by the manufacturer, rebuilt with a new high-speed pinion and a 5-axis milled 3rd stage impeller, then reinstalled and back in production.

Compressor Rebuilds Joy TA-50 Rebuild: Rentals Returned, Full Production Restored

A Joy MSG Series TA-50 flagged for high-frequency noise and irregular vibration got a full gear-case rebuild. The plant sent its rental compressors back and returned to full production.

TFG Dryers Not Every Dryer Problem Needs a New Dryer

When a compressed air dryer underperforms, TFG doesn't default to selling a new Bone Dry. Sometimes the right fix is TFG controller software in the existing PLC, a new PLC, or upgraded valves.

Compressor Rebuilds Maintenance Is Key to Reliability: Overhauling a 60 PSI 2ACII

An extensive overhaul of a 60 PSI 2ACII centrifugal compressor that had seen little beyond filter and oil changes: sleeved barrels, a new 2nd stage diffuser, impeller repairs and new oil coolers.

Need the article version of your plant problem?

Send the issue, equipment type, and production context. The Fischer Group can help determine whether the next step is service, parts, diagnostics, controls, or dryer review.